Detailed Product Description

 

*Features and applications of product

The product is suitable for power transmission line or connecting wire of movable electric equipment of fixed laid down with 0.6/1kv or below of AC rated voltage. The product has many features such as high temperature resistant and radiation resistant, hardiness, acid proof, alkali proof corrosive gases resistant, water proof, etc. the structure of cable is flexible. Its electric property is constant at the environment of high temperature (cold). It has excellent anti-ageing property and long life. It is widely used in industries such as metallurgy industry, electric power industry, petroleum industry, electronics industry and automobile industry.

*Executive standard of product

Enterprises standard

*Features of application

1. AC rated voltage: U₀/U 0.6/1kv

Maximum temperature of cables conductor: 180^oC

Minimum ambient temperature: for fixed laid down, not less than -60^oC

2. The installed and laid down temperature of cable should not be less than -25^oC.

3. The permitted bent radius of cable: minimum value will be 6 times of outer diameter of cable.

*Basic type and name

Type	Name   of     product
YGGZ	Silicon rubber insulation silicon rubber sheath high temperature resistant power cable
YGGZR	Silicon rubber insulation silicon rubber sheath movable high temperature resistant power cable
YGGZBX	Silicon rubber insulation reinforced type silicon rubber sheath high temperature resistant power cable
ZR-YGGZ	Silicon rubber insulation and sheath reinforced type high temperature resistant flame retardant power cable
DQ-YGZ	Silicon rubber insulation NBR sheath high temperature resistant power cable
LD-YGZ	Silicon rubber insulation neoprene sheath high temperature resistant power cable
YGGZ22	Silicon rubber insulation silicon rubber sheath steel tape armored high temperature resistant power cable
YGGZP	Silicon rubber insulation silicon rubber sheath copper wire shielded high temperature resistant power cable

*Main technical index

1. DC resistance of finished cables conductor should be in conformity with the regulations of GB 3956.

2. At 20^oC the insulation resistant should not less than 100MΩ·km.

3. The finished cable cannot be broken when withstood AC of 50Hz, 3.5kv for 5 min.